Quantum 800 - 5- Standard Equipment and Accessories on Request; 6- Manufacturing Elements

© İnnosis Makine 11
5- STANDARD EQUIPMENT AND ACCESSORIES ON REQUEST
Standard Equipment
• Supporting foot on column base
• Extractible and reversible pile guide bearing
• Hydraulic Tracks with automatic brakes
• Pile height guide measured in millimeters
Accessories
• Hydraulic Rock Drill
• Hydraulic Concrete Core Barrel
• Full functional remote control
• Templates for any type of pile section
• Post Extractor (Balanced/Hydraulic)
• Flashing Safety indicator light
• Working Light
• Accessory Power Plug
• Maintenance Toolbox
• Standard pile hammer and pile head
• Standard pile hammer template
• Proportional hydraulic valve
• Longitudinal inclination of the column
• Engine Cooling Liquid
6- MANUFACTURING ELEMENTS
The main elements of the pile driver can be grouped as:
Chassis group: This is a complex structure of which take part: the basis level, the fuel and
hydraulic oil tanks, the slide with its components, the column with its components and the
hammer group. All the components of the chassis group are built with high quality components
and therefore highly reliable and funconal.
Undercarriage: The whole chassis group of the pile driver is set up on a crawler undercarriage,
which makes it possible to move the machine. Other complete equipment are installed on the
undercarriage and all these elements make the pile driver a ‘complex machine’. It is able to
move itself also on dicult grounds that oen are not adapted to vehicles on wheels. Besides
the chassis structure, the crawler wheels (two) are also parts of the undercarriage. They are
necessary for the transmission of the moon. Every single one is composed with a dynamic oil
engine, a reducer with a negave brake (this means that the brake is automacally in funcon,
so the machine can’t move when it’s operang), a gear wheel, two lile crawler ghtening