Quantum 800 - Trailer Tow Bar

© İnnosis Makine 43
2. Remove the plug part (3) and part (2)
3. Clean the thread and insert the new Teon plug. Apply a light covering of grease to the tread
and insert part (3)
4. Follow the steps to ghten on page 43
4.3 Trailer Tow Bar
The Quantum Pile Driver is supplied with a towing coupler. It is placed on the rear of the machine
with the purpose to permit the towing of a suitable trailer.
Unlock and extract the safety pin (2), Figure 27;
Draw out the pivot (1);
Insert the lunee of the trailer in the seat of the hook (3); Insert
again, pivot and block it with the safety pin.
The maximum mass to tow is 3000 kg,
Fig 27 The coupler