Quantum 800 - Use and Information; 1- Use; 2- Use in Cold Climate

© İnnosis Makine 29
• Burning risk for contacts with the endothermic parts of the engine (label #3)
• Face and eye injuries for projecon of solid parts (label #10)
• Abrasion further to collision with metallic parts (label #8, #9 and #11)
• Injuries to the auditory apparatus for not having used the proper and proper protecon
(label #12)
(For labels refer to gure 12 at page 27)
IMPORTANT:
To avoid risk, proper and aenve behaviour of the operator(s) is fully required.
USE AND INFORMATION
1- USE
As it is already emphasised in fundamental safety rules and also in Safety Instrucons (1.
Fundamental Rules) only an operator must be trained and qualied for the purpose of
the use and maintenance of the pile driver may operate the machine. The operator must
fully understand all the instrucons wrien in this manual and review all the labels (safety
rules and lever movements). For correct use and operaon of the machine, it is
compulsory that the pile driver is being used only for the purpose it is designed for and
that all the maintenance tasks foreseen by the manufacturer are respected.
It is further advisable to point out that the safety controls and the technical characteriscs
of the pile driver have been elaborated in accordance to the appropriate safety rules,
during the development phase. It is strictly forbidden for the customer to alter the
technical characteriscs or to erase the safety devices/labels placed on the pile driver
with the purpose to modify its performance. Whenever this happens or when the pile
driver is used in an improper or incorrect way, the warranty, as well as the responsibility
of the manufacturer will immediately be void.
2- USE IN COLD CLIMATE
The pile driver is designed for the use in a temperature range between –20° and +40°C. If
the machine is used in other types of climates, the manufacturer would not be
responsible for accidents due to funcon of the machine. However, if the machine is used