Quantum 800 - Quantum Quick Hitch - Instructions

© İnnosis Makine 68
APPENDIX C
QUANTUM QUICK HITCH - INSTRUCTIONS
If a quick hitch is ed to your machine please follow these instrucon to change from the
hammer to the second aachment (Rotary drill)
Disconnect all hydraulic hoses. Keep them clean.
Remove all 8 bolts down both sides of the main frame – store for later use
Look under the drill, you will see one bolt in the centre of the frame – remove and store for later
use.
Your drill is ed with (red) liing eyes, - use these with associated cercated li gear to remove
and store the aachment in a clean and dry locaon.
Once the drill or the aachment is removed
you will have a main frame that looks like this. It is now ready to receive the hammer.