Quantum 800 - Safety Labels

© İnnosis Makine 25
standard operaonal procedures in compliance with the rules and regulaons of the country
of use.
All of the funcons of the pile driver are subject to acvaon of the corresponding levers that
are placed on a hydraulic control device. The only excepon is starng of the engine. Before
starng the engine, the operate shall complete a daily check sheet or follow your company
guidelines. Start-up Checklist see Appendix B
IMPORTANT:
• It is essenal to observe all the safety rules when doing the any checks.
• Insure there are no people and objects around the machine to avoid any possible
risk to them.
3-2 Safety Labels
In addition to the contained indications in this manual, there are some adhesive safety
labels on different parts of the machine. These labels represent a simple adequate
safety message. They are prepared in shape and color, based on the norms they are
related to. For instance, the circular labels stand for obligation (in blue and white colors),
and prohibition (in red, white, and black colors). The triangular labels stand for danger
(yellow and black colors). Triangular labels are warning for danger and supply more
information about the safety rules that need to be respected. All the used labels on the
machine can be found in figure 12.