Quantum 800 - Maintenance; 1- Instructions; Overview

To Next Page

To Previous Page

Maintenance

1- INSTRUCTIONS

1.1 Overview

The Manufacturer has foreseen a maintenance schedule, which if carried out with care by the

customer will maintain the eciency of the machine. This will preserve the equipment of any

possible damage for many hours.

The operator must be a qualied and trained person in the care of the machine. In any case, he

must not rely on his memory alone, but he must always read the instrucons of this manual and

carry them out in an accurate way, respecng the safety rules.

Before any kind of repair task, the operator must place a sign on the Pile Driver with the wrien

words ‘Machine Under Repair, do not start’ for his own safety and prevent damage to the

machine.

Only use the correct tool to loosen or remove bolts and other parts. Only use the correct

replacement parts from the Manufacturer.

At the end of the maintenance service, clean the area from water, oil, grease, rags, equipment,

or other material.

IMPORTANT