EasyManua.ls Logo

Quantum 800 - 1- Fundamental Rules; 2- Safety Precautions for the Pile Driver; Transport

Quantum 800
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© İnnosis Makine 14
1- FUNDAMENTAL RULES
It is mandatory to read these instrucons carefully and completely and ensure they are
understood.
Accidents are unlikely to happen when the general safety rules are known, implemented and
pracced. Before operang the machine, it is mandatory that ALL safety tests be undertaken
thoroughly.
The Pile Driver must be entrusted to a competent, qualied, and trained personnel. The
Manufacturer is not responsible for accidents caused by carelessness of the personnel,
improper or incorrect use of the Quantum Pile Driver, or the failure of the safety rules.
Furthermore, the warranty of the machine would immediately be void.
2- SAFETY PRECAUTIONS FOR THE PILE DRIVER
2-1 Transport
Quantum Pile Driver is exceponally praccal and useful self-propelled crawler machine.
However, strict safety precauons are required. It is highly recommended to use a remote
control unit to load/unload if supplied. The movement of the pile driver on the road is totally
forbidden unless on a construcon site or control area by signal ribbons. This means that
outside the construcon site, the pile driver has to be transported on a vehicle.
Fig.3 Pile driver anchoring point
Without the remote control the operator must posion themselves in a safe locaon to allow
them to control the machine.

Table of Contents