Quantum 800 - Introduction

To Next Page

To Previous Page

INTRODUCTION

1- GENERAL INFORMATION

The Quantum pile driver is a new machine for the driving of guardrail/solar posts. It is precisely

designed as a self-propelled machine able to use a remote control or GPS locaon system. The

machine is very stable because it is supplied with a safe and reliable rubber crawler track. The

use of high quality components guarantees high performances on any type of ground or road

surface, and therefore the machine gets the advantage of sasfactory quality and quanty

work in construcon sites. Speed and precision movements of the machine is example of this.

The company İnnosis (hereafter mentioned as ‘Manufacturer’) designed and realized the

machine respecting appropriate safety rules with the precise intention to safe-guard the

operation personnel while operating the machine. At all times, the Manufacturer has the

right to modify the pile drivers in production, with the purpose to improve the product

without any obligation to inform the Customer and neither to readjust the machines

constructed previously.

Every pile driver is supplied with a copy of this instrucon manual, which must be read very

carefully before using the machine. Lack of knowledge about its operang system and its

funcon, and therefore improper and/or incorrect use of the machine may cause accidents

with damages and consequences to the operator and to the pile driver itself. Every pile driver

is supplied with all the manuals and handbooks of use and maintenance concerning some of

the components applied on it. All manuals are integrang part of this manual and should be

kept together with this one in one single case. Therefore, even if the Manufacturer provides

all the informaon concerning the pile driver when the machine is supplied (funcon, use and

maintenance) the customer must read all the manuals and observe the contained instrucons.