Quantum 800 - Page 37

© İnnosis Makine 37
Fig.18 Phase 4 of driving
Pile Extracon
A metallic bar will be inserted in the lateral holes of the pile, as shown in the gure. The bar
will be the connecon pin for the extracon. Aached to this and to the lateral hooks of the
hammer group will be the pile extracon chain, as shown in gure 19, operang as a e rod.
Acvang the concerning lever the column will be hoisted. The column will li the hammer
group as well as the pile. The extracon process nishes with the exiling of the pile.