Rae MiniRAE 2000 - Page 143

APPENDIX C
C-2
p
TN-132 Upgrading RAE Instruments Firmware
p
TN-133 Methylene Chloride-Specific Measurements using the
UltraRAE
p
TN-134 UltraRAE Bar Code Reader Patterns an Adjustments
p
TN-135 UltraRAE Firmware & Tube Data Upgrade
Procedures
p
TN-136 UltraRAE Operations Tips
p
TN-137 Exiting Diagnostic Mode for ToxiRAE LEL
p
TN-138 RAE System Year 2000 Compliance
p
TN-139 UltraRAE Communication with NT
p
TN-140 Extension Tubing Volume and Delay Time
p
TN-141 MultiRAE Remote Control Functions
p
TN-142 MiniRAE 2000 Preprogrammed Compound Library
p
TN-143 Accuracy Comparisons of Gas Detection Tubes
p
TN-144 Handling LEL Sensor Poisoning
p
TN-145 Proper Care of Nickel Cadmium Battery Packs
p
TN-146 Turning On UV Lamps in a PID Monitor
p
TN-147 UltraRAE: Butadiene Specific Monitor
p
TN-148 Measurement of Phosphine (PH
3
) by PID In the Food
Storage industry
p
TN-149 PGM-30 UV Lamp Care
p
TN-150 Understanding the ppbRAE
p
TN-151 Electrochemical Sensor Replacement and Maintenance
p
TN-152 Effects of Operating Conditions on Oxygen Sensors
p
TN-153 TC Sensor Applications and Correction Factors
p
TN-154 SampleRAE Correction Factors
p
TN-155 2-Year Oxygen Sensor Installation and Calibration
p
TN-156 Correction Factors for Combustible Gas (LEL) Sensors
p
TN-157 Moisture Exchange Tubes for Humidity Control of Test
Gases
p
TN-158 Conversion of PID Readings to Methane Equivalent
Response
p
TN-159 Nerve Agent Measurements by PID
p
TN-160 Upgrading MultiRAE/QRAE Ni-Cd Battery Pack
Technical Notes are available at www.raesystems.com.
See Appendix E to order hard copies of Technical Notes.