PROGRAMMING
4-2
4.1 Programming Mode
The programming mode allows the users to change the
setups in the monitor, calibrate the monitor, modify the
sensor configuration and enter user information, etc. The
programming mode has four menu items. Each menu item
includes several sub-menus to perform additional
programming functions. Appendix A shows a more
detailed menu tree structure.
Programming Menu
Calibrate/Select Gas?
Change Alarm Limits?
View or Change Datalog?
Change Monitor Setup?
Once inside the programming mode, the LCD will display
the first menu. Each subsequent menu item can be viewed
by pressing the [N/-] repeatedly until the desired menu is
displayed. To enter the sub-menu of a particular menu,
press [Y/+] key, the sub-menu will be displayed.
Return to Operation mode: To exit the programming
mode and return to operation, press the [MODE] key once
at any of the programming menu displays.
To Next Page
Loading...
