Rae MiniRAE 2000 - Change TWA Limit

PROGRAMMING
4-20
4.5.3 Change TWA Limit
This sub-menu item allows the user to change the TWA
limit. The LCD displays “TWA limit?”
1. Press [Y/+] and the display will show a flashing cursor
on the left-most digit of the previously stored TWA
limit.
2. To modify this limit value, use the [Y/+] or [N/-] key
to change the digit value and press the [MODE] key
momentarily to advance to the next digit. The flashing
digit will move on to next digit to its right. Repeat this
process until the new limit values is entered. Press and
hold the [MODE] key for 1 second to exit data entry
mode.
3. If there is any change to the existing value, the display
shows “Save?” Press [Y/+] to accept the new value
and move to the next sub-menu. Press [N/-] to discard
the changes and move to the next sub-menu.