OPERATION
2-13
2.4.2 Hygiene Mode
In Hygiene Mode, the unit will continuously taking
measurements, once the power is turned on. After the
initial start-up sequence displaying the current monitor
settings, the LCD displays the instantaneous readings.
The Hygiene operation menu displays include:
• Real time readings in ppm
• Current TWA/Avg, STEL and Peak values (see
Section 4.6.6)
• Run time
• Current battery voltage
• Date, time and temperature
• Log on/off?
• Gas name
• PC communication?
• Hygiene
Detailed description of most of these displays are the same
as Section 2.4.1.
To Next Page
Loading...
