Rae MiniRAE 2000 - Change Alarm Mode

PROGRAMMING
4-32
4.7.4 Change Alarm Mode?
There are two different alarm modes: Latched and
Automatic Reset (Auto Reset) in the MiniRAE 2000 that
can be selected from the programming menu.
1. “Change Alarm Mode?” is the fourth sub-menu item in
the Monitor Setup menu.
2. Press the [Y/+] key; the display shows the current alarm
mode.
3. Press the [Y/+] key to accept the currently displayed
alarm mode. Press [N/-] key to toggle to the other
alarm mode. Press [MODE] to exit this sub-menu and
move to the next monitor setup sub-menu.
4. If there is any change to the existing setting, the display
will show “Save?” Press [Y/+] to save the change.
Press [N/-] or [MODE] to discard the change and move
to the next sub-menu.