PROGRAMMING
4-24
Press [Y/+] and the monitor will return to the first
event. Press [N/-] and the monitor will remain in the
last event.
3. Press [Y/+] to review the first data of the selected
event. The display shows the stored data including the
time stamp in hours and minutes, and measurement
values.
Action Display
Event, Log# 1?
[Y/+] 10/01/97, 14:20:07, Avg. 2.0, Max 3.3
[Y/+] 14:20:08, Avg. 2.0, Max 3.4
4. Press the [Y/+] or [N/-] key to move forward or
backward to view other data from this event. When the
beginning or the end of the event is reached, the
message “1st data” or “End data” will appear. Press the
[MODE] key to exit the current event.
To Next Page
Loading...
