Operation Quantron E
55
4
Automatic Mode (Auto km/h)
a) Select Auto km/h:
1. Switch on the control unit Quantron E.
2. Switch from the Hopper configuration menu to the AUTO/MAN operation
menu.
3. Highlight the AUTO km/h selection field.
4. Press the Enter key.
The operating mode setting is saved.
5. Press the ESC key to return to the previous menu
or
Press the Menu key to return to the Operating Screen.
n CAUTION
Danger of injury caused by automatic adjustment of
the drop point
On the AXIS 50.1 W the alarm move to drop point intervenes.
After actuating the Start/Stop button, the drop point is automati-
cally approached using the electrical setting cylinder to the pre-set
value. This can cause injuries and material damage.
Before actuating the Start/Stop button, ensure that no one
is in the danger area of the machine.
NOTICE
If, during running (i. e. travelling to the field) a change is made to the fertiliser
settings, before starting to spread you must actuate the kg/Weigh Quantity
button with the vehicle stopped.
To Next Page
Loading...