Record DFA127 - Page 68

Configurations
16
102-127108955 V1.1 68/ 102
Setting for Low Energy applications to meet the normative
requirements in the EU.
▪ See notes in the chapter Notes for Low Energy
Drives (Low Energy)
Parameter Default value
Driving cycle → Closing speed 10
Driving cycle → Opening speed 20
Driving cycle → Acceleration 15
Time delays open → Time de-
lay open
2)
5
Time delays open → Time de-
lay open SSK
5
Drive → Collision 5
Manual drive → When closing Activated
Manual drive → Collision Activated
→ EU Low Energy
Manual drive → Closing speed 10
Setting for Full Power applications to meet the normative re-
quirements in the U.K.
Parameter Default value
Manual drive → When locked Activated
→ UK
Manual drive → When Auto-
matic
Activated
Setting for Low Energy applications to meet the normative
requirements in UK.
Parameter Default value
Driving cycle → Closing speed 10
Driving cycle → Opening speed 20
Driving cycle → Acceleration 15
Time delays open → Time de-
lay open
2)
5
Time delays open → Time de-
lay open SSK
5
Drive → Collision 5
Manual drive → When closing Activated
→ UK Low Energy
Manual drive → When locked Activated