COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.2, REV-G | 112
The table below describes the Playback controls.
# CONTROL DESCRIPTION
1 Playback/Record toggle Toggles between Record mode and Playback mode.
2 Histogram Displays the clip histogram. The histogram changes when Look settings
change. For more information, go to “Looks” on page 124.
If using the touchscreen, touch the histogram to open the Tools menu.
3 Load Previous Clip Loads the previous clip in the playlist.
4 Frame-by-Frame Reverse Moves through the clip frame-by-frame in reverse.
5 Reverse Play/Pause toggle Plays clip in reverse, and toggles between play and pause.
6 Play/Pause toggle Toggles between play and pause.
7 Frame-by-Frame Forward Moves through the clip frame-by-frame.
8 Load Next Clip Loads the next clip in the playlist.
9 Play Options Displays the following subset of options: Play Once, Loop, Loop Playlist,
and Playback Speed.
10 Play Once Plays clip to the end, and does not repeat the clip.
11 Loop Plays the clip on a loop.
12 Loop Playlist Loops all clips in the playlist. To create a playlist, go to Menu > Playback >
Menu > Media, and move clips to the Play List field.
13 Playback Speed Option to select x1, x2, x4, x8, or x16 playback speed.
14 Marker Options Displays the following subset of options: In Point, Remove In/Out Point,
Out Point, Previous Marker, and Next Marker.
15 In Point Sets a red In Point marker in the Playback Status Bar. Use an In Point
marker in conjunction with an Out Point marker to play only a certain
portion of a clip. The In/Out Point markers help when the clip is long and
you want to focus on a particular segment.
16 Remove In/Out Point Removes the In/Out Point markers and skips to the end of the clip.
17 Out Point Sets a red Out Point marker in the Playback Status Bar. Use an Out
Point marker in conjunction with an In Point marker to play only a certain
portion of a clip. The In/Out Point markers help when the clip is long and
you want to focus on a particular segment.
18 Previous Marker Goes to the previous marked frame, which displays as a red line in the
Playback Status Bar. Disabled when there are no marked frames.
19 Next Marker Goes to the next marked frame, which displays as a red line in the
Playback Status Bar. Disabled when there are no marked frames.
20 Clip/Camera Information Indicates if clip was recorded in HDRx, the current camera power status,
and audio input signals.
To Next Page
Loading...
Need help?
General
