RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0020_V5.2, REV-G | 25
DISPLAYS AND ELECTRONIC VIEWFINDERS
This section describes the RED displays and electronic viewfinders (EVFs).
RED offers the following displays and EVFs:
ITEM PART NUMBER
RED Touch 5.0" LCD (800 x 400 resolution) 730-0008
RED Touch 7.0" LCD
1
(1920 x 1136 resolution) 730-0007
RED Touch 9.0" LCD (1280 x 784 resolution) 730-0011
RED PRO LCD 7" (1024 x 600 resolution) 730-0009
BOMB EVF (LCOS) 730-0004
BOMB EVF (OLED) 730-0010
1. The RED Touch 7.0" LCD requires that your DSMC is on firmware v5.2.28 or later.
For a full list of LCD and EVF user keys and default actions, go to “Default Key Functions” on page 191.
RED DISPLAYS
RED displays provide important camera parameters on the graphical user interface (GUI) and offer a variety of
monitor viewing options. RED touchscreen displays enable you to use gestures to navigate menus and adjust
camera parameters. RED displays feature 8-bit RGB, 4:4:4 progressive scan, providing up to 16.7 million colors
and up to 70% NTSC color gamut.
TOUCHSCREEN PRECAUTIONS
WARNING: DO NOT use the threaded holes to mount to the BRAIN. Damage to a RED display or other components
of the DSMC system caused by using these threads are not covered under warranty.
WARNING: DO NOT use a RED display as a handle to lift or carry the DSMC. Damage to a RED display or other
components of the DSMC system caused by using the display as a handle are not covered under warranty.
IMPORTANT: The RED LCD swivel axis has a total adjustment range of approximately 360˚ (180˚ clockwise or
counterclockwise from the nominal “rear-facing” orientation). The tilt axis range of adjustment is approximately
180˚. Damage to a RED display or other DSMC components caused by excessive force is not covered under
warranty.
RED Touch 7.0" LCD
To Next Page
Loading...
Need help?
General
