RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC 955-0020_V5.2, REV-G | 119
4. Select a size from the Size drop-down menu.
5. Go to the Rack tab.
6. Use the Rack Speed slider to change the speed at which the lens moves. Move the slider to the left for a
slower speed, and to the right for a faster speed.
7. Select the number of rack points (1–4) from the Rack Points drop-down menu.
A line for each rack point displays, indicated by the letters A, B, C, and D. The focus distance displays for
each rack point.
8. To reset the focus distance to the value calculated by the autofocus algorithm, select Re-Autofocus.
To Next Page
Loading...
