To Next Page

To Previous Page

RED DSMC OPERATION GUIDE

955-0020_V5.2, REV-G | 28

REDMOTE

The REDMOTE is a remote camera control unit for the DSMC that attaches to the rear of the BRAIN or rearmost

expansion module. The REDMOTE may be detached from the camera or rearmost module and provide wireless

remote control of the camera over the proprietary REDLINK™ protocol.

For a full list of REDMOTE user keys and default actions, go to “Default Key Functions” on page 191.

For more information, go to “REDMOTE Operation” on page 133.

IMPORTANT: To operate properly, upgrade both REDMOTE and DSMC firmware to the most recent version.

REDLINK BRIDGE

The REDLINK Bridge is a wireless module that provides communication support for third-party app

development. The REDLINK Bridge attaches to the rear of the BRAIN or other compatible DSMC rear module.

The REDLINK Bridge is part of the REDLINK Development Kit and uses the REDLINK Command Protocol (RCP)

to communicate information between the DSMC and your application.

For more information, see the REDLINK Bridge Operation Guide, available at www.red.com/downloads.

NOTE: The REDLINK Bridge requires DSMC firmware v5.2.8 or later.

REDMOTE

REDLINK Bridge

RED DSMC EPIC User Manual

Questions and Answers: