COPYRIGHT © 2015 RED.COM, INC
RED DSMC OPERATION GUIDE: EPIC/SCARLET
955-0020_V6.0, REV-J | 116
C. Manually set the next focal length.
D. Select Add Cal @ xx..., where “xx” is the current focal length.
NOTE: If you calibrate a focal length that has already been calibrated, the new files overrides the previ-
ous file.
The lens calibration process for the current focal length starts and a progress bar displays. Once the
calibration process starts, DO NOT touch the lens, since that may cause incorrect calibration.
7. Repeat Step 6 for each focal length of the lens.
The lens calibration file remains on the camera after system restores and firmware upgrades.
To Next Page
Loading...
