To Next Page

To Previous Page

RED DSMC OPERATION GUIDE: EPIC/SCARLET

955-0020_V6.0, REV-J | 120

SELF-TEST

The Self-Test menu includes: Enable Sensor Test Pattern and Touchscreen.

ENABLE/DISABLE SENSOR TEST PATTERN

The Sensor Test Pattern feature is only used during manufacturing. The sensor test pattern is a white screen.

TOUCHSCREEN

To perform a touchscreen self-test, follow the instructions below:

1. Go to Menu > Settings > Maintenance > Self Test.

2. Select Touchscreen.

A grid of green squares displays on the touchscreen.

3. Touch each box with your finger.

Each green box turns blue.

4. To exit the self-test, perform one (1) of the following actions:

‒ Touch all of the boxes, so that they are all blue.

‒ Press and hold the touchscreen.

‒ Press the Enter or Menu button on the DSMC Side Handle or REDMOTE.

RESTORE SYSTEM

Restore System changes all settings to the factory default values. To perform a System Restore, follow the

instructions below:

1. Go to Menu > Settings > Maintenance.

2. Select Restore System.

3. Select Yes on the screen that asks you to confirm the System Restore.

The BRAIN turns off.

4. Turn on the BRAIN.

NOTE: After performing a system restore, pair the REDMOTE to the camera again.

Other manuals for RED Epic

Questions and Answers:

Need help?

Do you have a question about the RED Epic and is the answer not in the manual?

General