To Next Page

To Previous Page

RED DSMC OPERATION GUIDE: EPIC/SCARLET

RECORD VIA HD-SDI OR HDMI

This section describes how to record via HD-SDI or HDMI through simultaneous record (recording to an SSD

and an external recorder at the same time) or external record only. For more information on how to enable

default menus for a external recorder, go to “Cannot Use Touchscreen or DSMC Side Handle” on page 178.

SIMULTANEOUS RECORD

You can record simultaneously to an external recorder and a RED SSD. To record simultaneously, follow the

instructions below:

1. Connect the BRAIN to an external recorder with an HD-SDI or HDMI cable.

2. Ensure an SSD is inserted in the camera and formatted.

3. Begin recording.

EXTERNAL RECORD

You can record to an external recorder without recording to an SSD. To record to an external device only, follow

the instructions below:

1. Connect the BRAIN to an external recorder with an HD-SDI or HDMI cable.

2. Ensure the SSD is ejected.

3. Go to Menu > Settings > Recording > Mode.

4. Select External from the Storage drop-down menu.

5. Begin recording.

Other manuals for RED Epic

Questions and Answers:

Need help?

Do you have a question about the RED Epic and is the answer not in the manual?

General