DRIVING AIDS (2/3)
For safety reasons, carry
out these operations when
the vehicle is stationary.
“Distance warning”
This system notifies the driver when
they are too close to other vehicles.
Select “On” to activate the system.
Please refer to the vehicle user manual
for further information.
“Active braking”
This system notifies the driver If there
is a danger of collision. Select “On” to
activate the system. Please refer to the
driver’s handbook for further informa-
tion.
“Blind spot alert”
This system notifies the driver when
another vehicle is in their blind spot.
Select “On” to activate the system.
Please refer to the driver’s handbook
for further information.
Driving assistance
Lane departure warning
Lane departure warning setting
Active braking
On OFF
Driving assistance
Lane departure warning
Lane departure warning setting
On
On
On
Auto Expert
Distance warning
Active braking
Blind spot alert
Speed alert settings
Traction control
“Lane departure warning setting”
Press this menu to adjust the audio
volume and the lane departure warning
sensitivity.
– “Volume”: press “+” or “–” to adjust
the volume level (five levels).
– “Sensitivity”: select “Low”, “Middle”
or “High” to adjust the warning sen-
sitivity.
Note: if “Lane departure warning” is
switched “OFF”, the “Lane departure
warning setting” function is greyed out
and cannot be accessed.
“Lane keeping assist settings”
Select this menu to adjust the strength
of the steering wheel vibration and the
sensitivity of the lane departure warn-
ing.
– “Vibration”: select “Low”, “Middle” or
“High” to adjust the strength of the vi-
bration.
– “Sensitivity”: select “Low”, “Middle”
or “High” to adjust the warning sen-
sitivity.
Note: if the “Lane keeping assist” func-
tion is deactivated, the “Lane keeping
assist settings” menu is greyed-out and
cannot be accessed.
To Next Page
Loading...
Need help?
General
