driving aids ...........................................(up to the end of the DU)
lane departure warning ..........................................(current page)
safety distance warning .........................................(current page)
emergency active braking......................................(current page)
blind spot: warning signal ......................................(current page)
DRIVING AIDS (1/3)
For safety reasons, carry
out these operations when
the vehicle is stationary.
“Driving
assistance”
menu
From the home screen, press “Menu”,
“Vehicle” then “Driving assistance” to
access the following items:
– “Lane departure warning”;
– “Lane keeping assist”;
– “Lane departure warning setting”;
– “Lane keeping assist settings”;
– “Distance warning”;
– “Active braking”;
– “Blind spot alert”;
– “Speed alert settings”;
– “Traction control”;
– “Automatic high beam”.
“Lane departure warning”
This system notifies the driver when
they inadvertently cross a continuous or
broken line. Please refer to the driver’s
handbook for further information.
To activate it, select
or “On”.
“Lane keeping assist”
This system notifies the driver when
they accidentally cross a continuous
or broken line and triggers corrective
action on the steering system and the
trajectory of your vehicle. Please refer
to the driver’s handbook for further in-
formation.
To activate it, select
.
Driving assistance
OFF
Driving assistance
Lane departure warning
Lane departure warning setting
On
On
On
Auto Expert
Distance warning
Active braking
Blind spot alert
Speed alert settings
Traction control
To Next Page
Loading...
Need help?
General
