“Coordinate”
This function allows you to define
a destination using coordinates
(latitude and longitude).
“On map”
This function enables you to
define a destination from a point
you have selected on the map.
From the “Navigation” menu, select
“Destination”, then “On map”.
“Work”
This menu can be used to start
navigating towards your work
location.
When you select “Work” from
the “Address book” menu for
the first time, the system asks
you to record the address of
your place of work by selecting
the “GPS" position, “Address”,
“Points of interest” etc.
Select the way in which you
wish to enter your work ad-
dress, then confirm.
Note: to reset your home or
work address, access the
“Address book” menu, select
“Options” from the pop-up
menu, then select “Reset home
address” or “Reset work ad-
dress”.
“Address book”
You can save addresses in the
address book and use them as a
destination at a later time. Thus,
you have access to the following
functions:
“Home”
This heading can be used to
start guidance towards your
home.
When you select “Home” from
the “Address book” menu for
the first time, the system asks
you to save your home ad-
dress by selecting the “GPS
position", “Address”, “Points
of interest” etc.
Choose your preferred
method to enter your home
address and confirm.
ENTERING A DESTINATION (4/7)
To Next Page
Loading...
Need help?
General
