“Points of interest”
A point of interest (POI) is a serv-
ice, establishment or even a tour-
ist area close to a location (start
point, destination city, en route,
etc.).
Points of Interest are listed by cat-
egory: restaurants, museums, car
parks, etc.
Select “Destination” from the
“Navigation” menu, then “Points
of interest” to select a destination
from the points of interest.
“Name search”
A list is displayed in which you
can consult all POIs found
along the route (if there are
any) or around your current po-
sition. You can filter the list of
POIs using the keypad. Select
a POI from the list of results or
enter the name/type of POI that
you want to look for using the
keypad.
ENTERING A DESTINATION (3/7)
For safety reasons, carry
out these operations when
the vehicle is stationary.
“Location search”
This function enables you to
search for POIs in a town/city
or along a route, by selecting a
point of interest from a list or by
typing it in using the keypad.
Select the search area from
among the following catego-
ries:
– “In a city”;
– “Nearby”;
– “Along Route” (if any);
– “Near destination” (if any).
After selecting a search area,
the screen displays the POIs
available by category (All,
Airport, Automobile, etc.).
Select a category.
All POIs in this category are
displayed in a search area.
Select the desired POI to start
guidance.
Categories
(service station/car park/restau-
rant/accommodation)
Search for points of interest by
selecting categories from the
“Points of interest” menu.
On this screen, you can launch
a quick search using four types
of preset POIs:
– “Petrol Station” along a
route, if there are any.
– “Parking” near the destina-
tion, if there are any.
– “Restaurant” along a route,
if there are any.
– “Accommodation” near the
destination, if there are any.
If you currently do not have
a route or destination, these
POIs are searched around your
current or last known position.