USING VOICE RECOGNITION (6/11)
“Points of interest”
To search for a point of interest using
voice control:
– press the voice control button to dis-
play the main voice control menu;
– say “Destination” after the beep;
– after a second beep, say “Points of
interest”;
– search for a point of interest (petrol
station, car park etc.);
– search for the place where the place
of interest is.
For further information about using
points of interest, please refer to the
section on “Entering a destination”.
Using favourites with voice
recognition
The favourite contacts added to your
home pages with a saved telephone
number or address can be called di-
rectly using voice recognition. To do
this:
– press the voice control button to dis-
play the main voice control menu;
– say “Display my favourites” after the
beep.
The system displays the saved
favourite(s).
– Say the “Favourites” you want to
use (e.g.: if the “Favourites” saved
is “Jane”, say “Call Jane” or “Go to
Jane”).
Controlling radio with voice
recognition
You can activate the radio using the
voice control included in your multime-
dia system. To do this:
– press the voice control button to dis-
play the main voice control menu;
– say “Radio” after the beep, then the
radio band you wish to listen to (FM
or AM):
– “FM";
– “AM";
– “DR".
– Say the desired frequency (for exam-
ple “Listen to 94.4”) or your choice
of search mode to find a radio sta-
tion: stations (not available for AM)
or "Presets” (for example “Listen to
preset 1”);
To change the band while listening, say
“change band” in the radio menu.
To Next Page
Loading...
