MAP (2/4)
“Navigation”
menu
From the home screen, press “Menu”,
then “Navigation” to access the “Map”.
“Map”
Pop-up menu: with no action on
the map
Press the pop-up menu button to
access the following menus:
– “Traffic map”;
– “Route”
or “Itinerary”;
– “Map settings”;
– “Where Am I?” or “GPS status”;
– “Stop guidance”.
“Traffic map”
Select the “Traffic map” to view the
current status of traffic on the map.
“Route”
Select Route to access the options
below:
“Route Planning Method”
You can select the route calcu-
lation criteria (“Fast”, “Short”,
“Economical”);
You can also select the default
route planning method when cal-
culating the route. To do this, press
the pop-up menu from the Map
menu, select Route then “Type of
route”.
Note: the functions described above
may vary.
You can choose the following
methods:
– “Fast”: this method shows the
quickest possible route based
on your route preferences. This
calculation method avoids resi-
dential areas and minor roads
where possible;
– “Short”: this method shows the
shortest possible route. It also
tries to avoid residential areas;
– “Economical”: this route com-
bines the benefits of the pre-
vious two methods. The navi-
gation system calculates as if
it were calculating the fastest
route, but it also takes other
roads in order to save fuel.
For safety reasons, carry
out these operations when
the vehicle is stationary.
To Next Page
Loading...
