Complete a number using voice
control
When you begin entering a telephone
number using the multimedia system
keypad:
– press the voice control button;
– complete the telephone number
using your voice or say “Call” after
the beep if you have already entered
the full number and wish to launch
the call.
Note: for more information on the use
of voice recognition, refer to the section
entitled “Using voice recognition”.
Enter a number using voice control
It is possible to dial a number using the
voice control included with your multi-
media system. To do this:
– press the voice control button to dis-
play the main voice control menu;
– say “Phone” after the beep;
– dictate the telephone number you
wish to call.
Note: it is recommended to dictate the
numbers either one at a time or two at
a time.
– The system displays the stated
number, say “Call” to call the number
or “Delete”/“Start again” to dictate a
different number.
DIAL A NUMBER (2/2)
To Next Page
Loading...
