8004708 Cellometer™ Ascend User Manual Rev A 7
Chapter 2. Hazards, Safety, and Environment
As with any equipment that involves moving parts, there are potential hazards involved in this instrument’s
operation and maintenance. This chapter identifies potential hazards, lists safety information and provides
environmental requirements for intended operation.
POTENTIAL HAZARDS
This section describes instrument safety features designed to minimize potential hazards. Before using the system,
familiarize yourself with this information.
WARNING: No modification of this equipment is allowed. Modification of equipment can
result in improper operation causing possible injury.
In the United States, the facility operating the instrument should follow all OSHA Manual lines
and applicable ANSI standards for the safe use of this instrument.
Customer and operator agree that it is their sole responsibility to fully understand and comply
with local, state, and federal laws, rules and regulations in the use of this system.
Cables and accessories not specified within the instructions for use with this instrument are not
authorized. Using other cables and/or accessories may adversely impact safety and performance.
Note: The Cellometer Ascend instrument should not be used adjacent to or stacked with other equipment unless
specified by Revvity. If the system must be used adjacent to or stacked with other equipment, then observe the
instrument in its configuration to verify instrument operation is normal and functions as expected.
Electrical Hazard
No part of the exterior housing should be removed. Do not open the instrument cover. For assistance, contact
Support by visiting https://www.revvity.com/contact-us or send an email to: CellC-support@revvity.com
WARNING: To avoid the risk of electrical shock, this equipment must only be connected
to a grounded electrical outlet.
In addition, ensure electrical supply plug is not obstructed and can be reached by users
to disconnect the device if necessary.
To Next Page