Chapter 9. Cleaning, Maintenance and Storage
8004708 Cellometer™ Ascend User Manual Rev A 46
Preventive Inspection and Maintenance
Regular preventive inspections should be carried out to reduce safety concerns of the instrument due to aging,
normal wear and tear, etc. The manufacturer assumes no responsibility for improper changes or repairs carried
out on the instrument or its accessories by unauthorized persons. The warranty will immediately become void
should unauthorized personnel attempt to repair or modify the instrument.
To schedule all preventive maintenance needs and address any functionality concerns, contact Support by visiting
https://www.revvity.com/contact-us or send an email to: CellC-support@revvity.com
STORAGE
When preparing the instrument for storage:
• Always thoroughly clean the instrument, cables and any of the accessories or consumables before storage.
• Check for any damage and if possible, re-package the Instrument and Operating Computer in the original boxes.
• Ensure that storage temperature and spatial requirements are met (see Site Preparation on page 16).
• DO NOT put anything on the instrument or the box in which it is stored.
Store the cables neatly, checking for signs of damage or wear frequently, and immediately before/after use. Do not
allow the cables to become kinked or tangled. Do not set heavy objects on any of the accessories or consumables.
Note: Always store beads and reagents according to their information for use documentation.
To Next Page