Chapter 2. Hazards, Safety and Environment
8004708 Cellometer™ Ascend User Manual Rev A 9
SAFETY INFORMATION
Personnel operating and maintaining the Cellometer Ascend instrument should be familiar with the safety
information included in this section.
Safety Protocols
Revvity assumes no liability whatsoever for any damage, loss or injury resulting from an application of a product
that is not in strict accordance with the instructions provided with the product. Revvity also assumes no liability for
any damage or injury arising due to operator error or mistake, including, but not limited to, injury arising from
operator’s lack of qualification or as a result of errors or mistakes committed by such operator.
Read all installation and operation instructions contained in this user manual thoroughly before connecting the
Cellometer Ascend instrument to the main power connection prior to use. The Ascend must be set, regulated and
used in accordance with instructions outlined in this user manual. Failure to observe safety warnings and
precautions may present a risk.
Only individuals with appropriate safety training and knowledge should operate, assist in the operation of, or
perform cleaning and routine maintenance of this instrument. Only the operator should be responsible for system
controls during a procedure.
Safety Features
The Cellometer Ascend instrument offers several safety features to prevent its misuse or unintentional activation.
All personnel who operate the system should be familiar with these safety features.
For assistance, contact Support by visiting https://www.revvity.com/contact-us or send an email to:
CellC-support@revvity.com
Federal Communications Commission
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To Next Page