Chapter 2. Hazards, Safety and Environment
8004708 Cellometer™ Ascend User Manual Rev A 8
Instrument System Hazard
Read the instructions, warnings and cautions provided with the instrument before using.
WARNING: Inspect instruments and cables for breaks, cracks, nicks and other damage before
every use. This may be done visually under magnification or with a high voltage insulation testing
device. If damaged, do not use it. Damaged instruments or cables may result in injury to the user.
CAUTION: The instrument is designed to accept only one slide at a time. Do not attempt to load
more than one slide into the sample slot. Doing so will cause an error and could damage the
instrument.
CAUTION: Do not stack equipment on top of the Instrument or place Instrument on top of electrical
equipment. This is an unstable configuration and does not allow for adequate cooling.
In addition, it is recommended that as much distance as possible be provided between the
instrument and any equipment emitting a high vibration signature. Elevated levels of vibration
may affect clarity of the image being viewed.
WARNING: Do not remove the instrument cover. For assistance, contact Support by visiting
https://www.revvity.com/contact-us or send an email to: CellC-support@revvity.com
Servicing Hazard
No one other than Revvity-authorized personnel may service inside the protective cover of the Cellometer Ascend
instrument.
CAUTION: Do not pull the system by the connectors. Toppling of the system or causing damage
to the system may result in the instrument no longer functioning as expected.
To Next Page