User Manual Bearing System RT-300
Issue: 2017/06/27 [Rev 1.04.c] Page 64 of 79 12-9-1-0013-9-2-0001-3-1-60
6.4.2.1 Power Supply
The power supply is connected to
PIN 5: [-] voltage supply GND (ground) and
PIN 9: [+] positive voltage supply
Permitted range of operating voltage: 11V... 28 V DC
Current consumption: max. 800 mA (depending on operating voltage and connected external
devices)
ATTENTION
- Ground of voltage supply not identical to ground of housing (due to
interconnected noise filter)!
- Reversing polarity of the poles will damage the device!
- The voltage supply is not separated galvanically from the frame. If desired, e.g. in
order to prevent current flow to the ground of the vessel, a DC/DC-converter has
to be adapted.
Fig. 97
To Next Page
Loading...