User Manual Bearing System RT-300
Issue: 2017/06/27 [Rev 1.04.c] Page 4 of 79 12-9-1-0013-9-2-0001-3-1-60
Content
1 SAFETY INSTRUCTIONS 7
1.1 Legend of Symbols 7
1.2 Basic Safety Instructions 8
2 EU DECLARATION OF CONFORMITY 8
3 GENERAL INFORMATION 9
3.1 Purpose of Use 9
3.1.1 Mobile Use 9
3.1.2 Stationary Use 9
3.2 Content of Delivery 9
3.3 Front View DCU (Display Control Unit) 10
3.4 Brief Summary DCU 10
3.5 Rear View DCU 12
4 TECHNICAL DATA 13
4.1 Electrical Characteristics 13
4.2 Mechanical Characteristics 15
4.2.1 DCU 15
4.2.2 Antenna 16
5 DISPLAY AND OPERATING 17
5.1 Display 17
5.1.1 LED-Circle 17
5.1.2 General Lighting 17
5.1.3 LC -Graphic-Display 18
5.1.4 Digital Bearing Value Display 18
5.1.5 Direction of Reference 18
5.1.6 Display of Signal Level 19
5.1.7 Squelch Level 19
5.1.8 Frequency / Channel Display (not available in VHF/UHF-Version) 19
5.1.9 Status Display 19
5.1.9.1 Warning 19
5.1.9.2 “ERROR“ Message 20
5.1.10 SCAN-Display 21
5.1.11 Selective Squelch (only ELT) 21
5.1.12 Status Alarm Contact 21
5.2 Operating the Bearing System RT-300 21
5.2.1 Switching On and Off: Key 1: On/Off 21
5.2.1.1 Switching On 21
5.2.1.2 Switching Off 21
5.2.1.3 External Switching On/Off 21
5.2.2 Switching the Band: Key 16 < Band > 22
5.2.3 Selection of Frequency / Channel: Key 15 < Channel / Frequ. > 22
To Next Page
Loading...