User Manual Bearing System RT-300
Issue: 2017/06/27 [Rev 1.04.c] Page 5 of 79 12-9-1-0013-9-2-0001-3-1-60
5.2.4 Squelch Function: Key 14 < Squelch > 23
5.2.4.1 Common Remark 23
5.2.4.2 Adjusting the Squelch 23
5.2.5 Volume: Key 5 < Vol.+ > and 10 < Vol.– > 24
5.2.6 „Selective Squelch“: Key 4 < ELT only > 24
5.2.6.1 Common Remark 24
5.2.6.2 Activating / Deactivating „Selective Squelch“ 25
5.2.7 Scan Function: Key 12 < Scan > 25
5.2.7.1 Common Remarks 25
5.2.7.2 Activating Scanning Function 26
5.2.7.3 Deactivating Scanning Function 26
5.2.8 Function Repeat: Key 3 < Repeat > 26
5.2.9 Function Live: Key 8 < Live > 27
5.2.10 Function Clear: Key 9 < Clr > 27
5.2.11 BID-Indicator 27
6 THE MENU 28
6.1 The Menu Structure 29
6.2 The Main Menu 30
6.2.1 Structure 30
6.2.1.1 Menu LIGHT/LCD 31
6.2.1.1.1 Adjusting Brightness of LC- Display: Function DIM LCD 31
6.2.1.1.2 Adjusting Brightness of Keyboard Lighting: Function DIM LEGEND 32
6.2.1.1.3 Adjusting Brightness of LED-Circle: Function DIM CIRCLE 32
6.2.1.1.4 Adjusting Contrast of the LC-Display: Function LCD CONTRAST 32
6.2.1.2 Menu: BEARING 33
6.2.1.2.1 Selecting Bearing Reference Direction: Selecting Function BEARING TYPE 33
6.2.1.2.2 Display Bearing Parameters: VIEW BEARING SETUP 36
6.2.1.3 Menu: INFO 36
6.2.1.3.1 INFO Beacon 36
6.2.1.3.2 INFO Receiver 37
6.2.1.3.3 INFO DCU (Display Control Unit) 37
6.2.1.3.4 INFO Statistics 37
6.2.1.4 Menu: SOUNDS 38
6.2.1.4.1 Adjusting Key Volume: Function BEEP VOLUME 38
6.2.1.4.2 Adjusting Volume Alarm Signal: Function ALARM VOLUME 38
6.2.1.5 Menu: SETUP 39
6.2.1.5.1 SETUP-Menu BEARING 39
6.2.1.5.2 SETUP Menu RECEIVER 44
6.2.1.5.3 SETUP Menu: SERIAL 46
6.2.1.5.4 SETUP Menu: COMPASS 49
6.2.1.5.5 SETUP Menu: OTHER 55
6.2.1.5.6 SETUP Menu: FACTORY RESET 57
6.2.1.6 MENU: SERVICE 59
6.2.1.6.1 Service Menu: BEARING 59
6.2.1.6.2 Service Menu: RECEIVER 60
6.2.1.6.3 Service Menu: DCU 60
6.2.1.6.4 Service Menu: COMPASS 61
6.2.1.6.5 Service Menu: REBOOT 61
6.3 Special Functions 62
6.3.1 Locking / Unlocking the Setup Menu 62