5. Click the [Accessories] tab.
If options in the [Accessories] tab are disabled, bidirectional connection is enabled. In this case, no
change is necessary for option settings.
6. Select options installed from the [Select printer options:] area, and then make the necessary
settings.
7. Select the appropriate size and type for the tray.
8. Click [OK] to close the printer properties dialog box.
Windows XP, Windows Server 2003
1. On the [Start] menu, click [Printers and Faxes].
The [Printers and Faxes] window appears.
Under Windows Server 2003, on the [Start] menu, point to [Settings], and then click [Printers and
Faxes].
The [Printers and Faxes] window appears.
Under Windows Server 2008, on the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
2. Click the icon of the printer you want to use.
3. On the [File] menu, click [Properties].
When you open the printer properties dialog box for the first time after installing the printer driver, or
if you have not specified the attached options yet, a prompt to specify the options appears.
4. Click the [Accessories] tab.
5. Select options installed from the [Select printer options:] area, and then make the necessary
settings.
6. Select the appropriate size and type for the tray.
7. Click [OK] to close the printer properties dialog box.
• Manage Printers permission is required to change the printer properties in the [Printers] folder. Log
on as an Administrators or Power Users group member.
•
If you are using the SmartDeviceMonitor for Client Port to share the printer as a print server,
bidirectional communication between the printer and a client PC will not be possible.
• If you add an optional tray to an existing printer, you must refresh the settings on the printer's
[Accessories] tab.
3. Printer Driver
98
To Next Page
Loading...
