Check the power source
• Keep
the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.
• Place the machine on a strong and level surface. Otherwise, the machine might fall and cause
personal injury.
• If you use the machine in a confined space, confirm that there is a continuous flow of air.
• Only connect the machine to the power source described on this sheet.
• Avoid multi-wiring.
• Connect the power cord directly into a wall outlet and never use an extension cord.
• Do not damage, break or make any modifications to the power cord. Do not place heavy objects
on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric
shock or fire.
• Do not plug or unplug the power cord with your hands wet. Otherwise, an electric shock might
occur.
• Make sure the wall outlet is near the machine and freely accessible so that in event of an emergency
it can be unplugged easily.
The power requirements of this machine are as follows:
•
100-120 V: 50/60 Hz 1.2 A
• 220-240 V: 50/60 Hz 0.6 A
Checking the Computer to be Connected
To use this printer, computers must meet the following specifications:
•
PC/AT-compatible computer with USB or network interface
• Operating system: Windows 2000/ XP/Vista, Windows Server 2003/2008
• 80-100MB or more available hard disk space
• To operate this printer, your computer must have at least the amount of memory necessary to run its
operating system.
Checking the Supplied Items and Unpacking the Printer
• The machine weighs around 15.5 kg (34.2 lb) (29.9 kg (65.9 lb) with options installed).
Setting Up the Hardware
37
To Next Page
Loading...
