• If the error still does not clear after the printer acclimates to room temperature and the power is turned
back on, contact your sales or service representative.
Network Interface Error
An error in the Ethernet port network function has occurred. Do the following:
1. Turn the printer off.
2. Turn the printer on.
If the message reappears, contact your service representative.
• p.316 "Where to Inquire"
Envelope Selector Position Mismatch
The envelope selector is in the wrong position or the printer driver settings are wrong. Set the envelope
selector
to the right position or change the printer driver settings. Alternatively, press the [Form Feed] key,
select a tray containing paper of the required size, and then print. To cancel the print job, press the [Job
Reset] key.
Status Monitor Errors
279
To Next Page
Loading...
