The printer starts feeding ink into its print-heads (taking approximately 10 minutes).
Make sure the "Ready" message is displayed on the control panel.
Do not switch off the power of the machine during this period. Make sure the plug is not removed
from the wall outlet.
You might hear a clicking sound while the print heads are filling. This is not a malfunction. It will stop
after a while.
Loading Paper
Load paper into the paper tray.
Normally, load paper into tray 1.
• Load paper with the paper grain parallel to the feed direction.
Loading Paper into Tray 1
Follow the procedure below to load paper into tray 1.
A4/Letter size paper is loaded here.
• Load A4/Letter size paper in orientation.
2. Preparing for Printing
44
To Next Page
Loading...
