*1
Under the PCL driver, the available custom size is 139.7-355.9mm (5.50-14.01 inch) (Vertical)
×55.0-216.0 mm (2.17-8.50 inch) (Horizontal).
• Thick paper: 157 g/m
2
(42 lb.) or more
Paper Handling Precautions
To ensure optimum print results, take care when handling paper before and after printing.
Loading Precautions
To ensure correct printing, handle the paper carefully.
Cautions when Loading Paper
•
Pull the tray completely out before loading it with paper.
• Load only supported paper in the paper tray.
• Load paper with the print side face down in the paper trays.
• Load paper with the paper grain parallel to the feed direction.
• Do not load paper of different types at the same time.
• To load a different type of paper than that already loaded, first remove all currently loaded paper.
• Do not stack paper over the limit mark.
To Next Page
Loading...
