Installing the Printer Driver under Mac OS X
This
section explains how to install the printer driver. After installing the printer driver, adjust the settings as
necessary.
If using the GX e3300N/GX e3350N, install the driver from the CD-ROM provided with the printer. If
using the GX e2600, download the driver from the Web site.
The following procedures are based on Mac OS 10.5.1. The procedures for your machine might differ
slightly from those shown if you are using a different version of Mac OS.
• Only the English version of the Macintosh printer driver is supplied.
Installing the Printer Driver on a Macintosh
Follow the procedure below to install the printer driver.
• You cannot install the printer driver while other applications are running. Be sure to close all
applications before installing the printer driver.
•
After installing the printer driver, you must restart the computer. Be sure to save any files you are
working on before installing the printer driver.
• To install the printer driver, you must log on as administrator. For details, consult the administrator of
the Macintosh in question.
1. Start Macintosh, and insert the provided CD-ROM into the CD-ROM drive.
The GX e2600 driver is not included on the provided CD-ROM. When you are using GX e2600,
download the driver from the supplier's Web site, save it in an accessible folder, and then decompress
it.
2. In the [RPCS_R] folder in the [Mac OS X 10.5 or later] folder, double-click the product
name.pkg icon.
Under Mac OS X 10.3.x - 10.4.x, double-click the product name.pkg icon in the [RPCS_R] folder in
the [Mac OS X 10.3 or later] folder.
A warning message appears.
When you are using GX e2600, open the folder that contains the driver, and then double-click the
product name.pkg icon.
Installing the Printer Driver under Mac OS X
133
To Next Page
Loading...
