Install in the following order from the left: black, cyan, magenta, and yellow.
4. Push in each cartridge.
5. Repeat steps 3 to 4 for all four cartridges.
6. Close the right front cover.
Plugging in the Power Cord and Turning the Power On
Before connecting the printer to a computer, connect the printer's power cord and switch the printer on.
• Only connect the machine to the power source described on this sheet.
• Avoid multi-wiring.
• Connect the power cord directly into a wall outlet and never use an extension cord.
• Do not damage, break or make any modifications to the power cord. Do not place heavy objects
on it. Do not pull it hard nor bend it more than necessary. These actions could cause an electric
shock or fire.
2. Preparing for Printing
42
To Next Page
Loading...
