11
ENERGY STAR Program
❖ Low-power Mode (Energy Saver mode)
This printer automatically lowers its power consumption 60 minutes after the
last operation has been completed. To exit Low-power (Energy Saver) mode,
press any key on the control panel. For more information about how to con-
figure Energy Saver mode, see “Specifying System Settings using the Control
Panel (System Menu)”, User Guide as a HTML file on the CD-ROM.
❖ Specifications
ENERGY STAR
®
Program Requirements for Imaging Equipment
The ENERGY STAR
®
Program Requirements for Imaging Equipment encourage energy con-
servation by promoting energy efficient computers and other office equipment.
The program backs the development and dissemination of products that feature energy saving
functions.
It is an open program in which manufacturers participate voluntarily.
Targeted products are computers, monitors, printers, facsimiles, copiers, scanners, and multi-
function devices. Energy Star standards and logos are internationally uniform.
Energy Saver mode Power Consumption Type1: 2.0 W or less (100-120 V)
2.5 W or less (220-240 V)
Type2: 3.4 W or less
Type3: 3.4 W or less
Default Interval 5 minutes
Recovery Time 2 seconds or less
RheingauP1_SafetyInfo_F2-EN_FM_forPaper.book Page 11 Monday, July 6, 2009 3:29 PM
To Next Page
Loading...
