If the bypass tray has been detached, be sure to switch the power off before reattaching the tray.
• Depending on how the paper was jammed, printing may resume from the next page, not the one
jammed.
• p.32 "Detaching and Reattaching the Multi Bypass Tray"
If You Cannot Remove Jammed Paper
This section explains how to remove badly jammed paper that you cannot remove by the usual methods.
• If the bypass tray and duplex unit are attached to the printer, switch the printer off and detach the
duplex unit.
• Do
not touch the feed belt, the transparent black band, print head rail rod, ink tubes, paper pressing
board, or toothed rubber belt. Also, take care not to snag any cables or ink tubes with your sleeves.
7. Troubleshooting
238
To Next Page
Loading...
