Using SmartDeviceMonitor for Client
SmartDeviceMonitor
for Client is an application that has functions such as the peer-to-peer printing machine
monitoring. We recommend you install this application on the client computer.
• Operating System: Windows 2000
Protocol Stack
TCP/IP protocol supplied with Windows 2000
• Operating System: Windows Server 2003
Protocol Stack
TCP/IP protocol supplied with Windows Server 2003
• Operating System: Windows XP
Protocol Stack
TCP/IP protocol supplied with Windows XP
• Operating System: Windows Vista
Protocol Stack
TCP/IP protocol supplied with Windows Vista
• Operating System: Windows Server 2008
Protocol Stack
TCP/IP protocol supplied with Windows Server 2008
What can you do with it?
Using SmartDeviceMonitor for Client, you can do the following:
• Peer-to-peer printing
• Send print jobs directly to the network printer without going through a print server.
• Print using a substitute printer if there are too many jobs waiting on the specified printer, or
if an error disables printing (Recovery Printing).
• Allocate multiple print jobs to multiple printers (Parallel Printing).
• Preregister groups of printers specified for Recovery Printing or Parallel Printing.
• Receive error message notification if an error occurs in the machine while it is printing or sending
a job.
• Monitoring function
• Check the printer status such as the remaining amount of paper while printing.
• Simultaneously monitor multiple printers in use.
• Check the printer's network settings and system configuration.
• Be notified of print completion.
4. Monitoring and Configuring the Printer
110
To Next Page
Loading...
