: Default: Dark
Color Mode
You can select the default color mode.
• Color
• Economy Color
• Black and White
Default: Color
Recycl.Ppr.Mode
You can enable this to print on recycled paper.
• Off
• On
Default: Off
Env.Slctr.Alert
You can specify whether or not to enable the Env.Slctr.Alert function.
To enable display of envelope messages, click the [Printer Configuration] tab in the printer properties
dialog box, and then clear the [When the envelope selector is set to Envelope Mode, use
unidirectional printing only] check box.
• Display Alert
If you attempt bidirectional printing on sheets when the envelope selector is in the (rear) position,
printing does not begin and an error message notifying you that the envelope selector is incorrectly
set will appear.
• No Alert & Prnt
Regardless of the envelope selector position, the printer ignores the error and continues printing.
Default: Display Alert
Pg Recov. Error
You can specify whether or not Page Recovery Error is reported.
• Display
• Do not Display
Default: Display
Ink C.U. Space
You can check the remaining capacity of the ink collector unit.
• For details about how to display the printer properties dialog box, see p.95 "Opening the Printing
Preferences Dialog Box".
6. Maintaining
186
To Next Page
Loading...
