The configuration page is printed.
The List/Test Print menu screen returns on completion of printing.
Check whether the print-head nozzles are clogged up or not by printing a nozzle check test pattern.
4. Hold the [Power] key down until the printer shuts down.
If you are connecting the printer to a computer via USB, proceed to p.56 "Connecting the Computer
and Installing the Software (USB Connection)".
If you are connecting the printer to a network, proceed to p.60 "Connecting the Computer and
Installing the Software (Network Connection)".
• For details about printing a nozzle check test pattern, see p.160 "Nozzle Check".
•
For details about the items on the configuration page, see p.65 "Checking the Printer Status and
Settings using the Printer's Control Panel (List/Test Print Menu)".
Setting Up the Hardware
55
To Next Page
Loading...
